Filter By:

  • Show More Brands
  • Show Fewer Brands

Forks

DVO Emerald Tapered 20-D 27.5
$1,895.00
- Air sprung with adjustable negative coil spring - Twin Tube open bath cartridge damper with Bottom Loader compression unit - Rebound, high and low speed compression external adjustability - Threadless aluminum steerer with 42mm 7000 series aluminum upper tubes - Carbon Torsion Arch increases stiffness by 25% - 36mm lower legs with forged magnesium 20x110mm dropouts - 74mm Post-Mount, 203mm disc brake only
Specialized RockShox SID WC Brain
$1,300.00
Sure, there are plenty of lightweight XC forks out there, but racing demands so much more. Nimble handling, gram-obsessed weight, buttery damping — combined they all make the difference between a good fork and a great fork. And with this in mind, the all-new RockShox SID World Cup Brain fork has been completely redesigned to meet the demands of XC racing, and hyperbole aside, we can confidently say that it sets the bar for race-worthy performance. The new SID has many new features, but the main attraction is its use of our proprietary Brain technology. Made famous on the rear of our Worlds-winning Epic, the Brain system knows the difference between rider and terrain inputs — staying firm in hard accelerations on smooth ground, and effectively soaking up imperfections when the trail decides to fight back. This translates to the highest efficiency possible when hammering up climbs, and smooth compression on the descents — all without ever having to flick a switch. The World Cup Brain edition of the SID is not just a slight upgrade over the RLC and XX models. Along with the integrated Brain technology, it utilizes a carbon fiber steerer and crown, which reduce weight by over 100 grams and increases the overall stiffness. Also adding to the stiffness of is the short-travel-specific design. Leaving the 120-millimeter segment to the trail category, RockShox’s engineers were able to focus on the 80- to 100-millimeter travel range, and therefore develop lighter and stiffer uppers and air shafts. This new design, along with SRAM's Torque Caps (they create an enhanced interface between the hub and fork dropout), Power Bulge technology that reinforces the lowers, and 110-millimeter Boost spacing, keeps torsional stiffness high, allowing you to point-and-shoot while descending. Last, but certainly not least, on the feature spec is the Solo Air spring that’s customizable with RockShox’s Bottomless Tokens. The Solo Air spring lets you adjust pressure with a single Schrader valve that controls the pressure in both the positive and negative air chambers, making adjustments to pressure simple and intuitive. To customize ramp-up preference, RockShox’s Bottomless Tokens can be added to create a suspension curve that’s custom to your preferences. - Tapered, full-carbon crown, and steertube, for optimized stiffness, steering precision, and light weight. - 110mm hub spacing, Power Bulge technology, and Torque Cap compatibility provides un-rivaled stiffness for an XC fork. - Top adjust Brain damper for on-the-fly Brain fade tuning. - RockShox Solo Air spring and Bottomless Tokens make setup easy and customizable. - Designed specifically around 100mm of travel for an optimal combination of weight savings and stiffness. - 29" wheel only - 51mm offset
Ohlins RXF 34 Fork
$1,150.00
Specialized's Öhlins RXF fork was designed to be the gold standard in frontend suspension. It operates off of a three-chamber air spring design (two positive and one negative), allowing for an offset of spring pressure that perfectly mates stiffness with a plush, responsive ride quality and utilizes proprietary TTX damping technology. Combined, this allows both parallel and separated oil flow that controls the overall pressure levels. In a practical sense, this means that the fork is guaranteed to remain high in the travel, while also ensuring smoothness and predictable bump absorption throughout the entire ride. The shape of the spring force is also capable of being adjusted, which allows riders more fine-tuning options for preferences like increased sensitivity without the threat of bottoming out. Öhlins has also incorporated an ultra-stiff alloy unicrown design that's comparable in rigidity to a 36mm stanchion fork, only in a 34mm package. This means that it'll experience less flex for more tire control, while also trimming down on some weight. - A tapered alloy steerer and high alloy unicrown ensure high stiffness and tire control with less chassis flex and chassis hysteresis. The result is a 34mm fork with a 46mm offset that's more rigid than other brands' 35mm forks. - 120, 140, and 160mm travel options guarantee the perfect ride for every style. - 15x100mm spacing makes it compatible with most wheel sizes.
Specialized RXF 36 27.5+/29er Fork
$1,150.00
The Ohlins RXF 36 fork drafts off of the success of the 34, while bringing more stiffness and room for bigger tires. It operates off of a three-chamber air spring design (two positive and one negative), and it utilizes proprietary TTX damping technology. Combined, this allows both parallel and separated oil flow that controls the overall pressure levels. In a practical sense, this means that the fork is guaranteed to remain high in the travel, while also ensuring smoothness and predictable bump absorption throughout the entire ride. The shape of the spring force is also capable of being adjusted, which allows riders more fine-tuning options for preferences like increased sensitivity without the threat of bottoming out. Ohlins has increased the stanchions to 36mm and upped the spacing to 110mm while retaining the ultra-stiff alloy unicrown design. This means that it'll experience less flex for more tire control, while also trimming down on some weight. - Features a three-chamber air spring, with two positive chambers and one negative, allowing for an offset of spring pressure that perfectly mates stiffness with a plush, responsive ride quality. The shape of the spring curve can also be adjusted to increase sensitivity without bottoming out. - TTX (Twin Tube) damping enables separated oil flow, so the fork will always provide the perfect degree of pressure. This way, it stays smooth and high in the travel without compromising bump absorption, traction, or stability. - A tapered alloy steerer and high alloy unicrown ensure high stiffness and tire control with less chassis flex and chassis hysteresis. 36mm stanchions with 51mm offset for party time on the trail. - 15x110mm spacing makes it compatible with most 29-inch and 27.5+ setups.
Cane Creek Helm Air 27.5
$1,100.00
Introducing the Cane Creek Helm, a 7-way adjustable suspension fork optimized for 140mm to 170mm of travel. Born in the mountains of Western North Carolina, Helm is designed to conquer aggressive trail, enduro racing, and anything in between. By isolating each damping and air spring adjustment, the Helm has the ability to be tuned for all types of terrain and riding styles and gives the rider ultimate control of their suspension set-up. WEIGHT - 2070 grams DAMPING - High Speed Compression, Low Speed Compression, Low Speed Rebound ADJUSTMENTS - 7-way adjustable suspension fork - High speed compression - Low speed compression - Low speed rebound - Air volume adjust (8-position Internal indexed system) - Independent positive air spring - Independent negative air spring - Indexed travel adjust system SPRING - High volume positive and negative air springs STANCHION DIAMETER - 35mm TRAVEL - Positioned at 150mm, 160mm, or 170mm from factory Optimized for 140 - 170mm of travel TRAVEL ADJUSTMENTS - Internal, 10mm Increments (170mm down to 100mm) 2 Travel spacers included AXLE / SPACING / OFFSET - "D-Loc" 15mm thru axle system / 15mm x 110 BOOST spacing / 44mm
Cane Creek Helm Coil 27.5
$1,100.00
Coil confidence is being rediscovered by endure riders all over the world. Fork chassis weight and overall bicycle weight has decreased over the last few years, allowing the return of faithful coil sprung suspension products. Helm Coil is optimized for 111mm to 160mm of travel, with the ability to be internally adjusted by changing the location of the spring perch (coil piston) on the travel-indexed compression rod. This procedure requires no additional parts. - D-Loc Axle Assembly: Hard anodized aluminum cam lever closes against a self-lubricating brass clamp washer for axle function longevity - Fast and easy keyed entry axle and lock system - Eliminates unwanted rotational and torsional axle forces * A spring is required for this shock. Spring Recommendations: 35lb spring - AAG0421 RED - (90-120lbs rider) 45lb spring - AAG0422 BLACK - (120-160lbs rider) 55lb spring - AAG0424 GREEN - (160-200lbs rider) ** Stock Spring in Helm Coil 65lb spring - AAG0426 BLUE - (200-240lbs rider) With changes in internal travel amount, rider positioning on the bicycle, bicycle head angle, and rider ability/style, spring rates will vary. For assistance please contact Cane Creek or your nearest Certified Service Center.
Specialized Ohlins RXF 36 27.5-inch Fork
$1,100.00
The Öhlins RXF 36 fork drafts off of the success of the 34, while bringing more stiffness and room for bigger tires. It operates off of a three-chamber air spring design (two positive and one negative), and it utilizes proprietary TTX damping technology. Combined, this allows both parallel and separated oil flow that controls the overall pressure levels. In a practical sense, this means that the fork is guaranteed to remain high in the travel, while also ensuring smoothness and predictable bump absorption throughout the entire ride. The shape of the spring force is also capable of being adjusted, which allows riders more fine-tuning options for preferences like increased sensitivity without the threat of bottoming out. Öhlins has increased the stanchions to 36mm and upped the spacing to 110mm with an ultra-stiff two-piece alloy crown design. This means that it'll experience less flex for more tire control, while also trimming down on some weight. - Features a three-chamber air spring, with two positive chambers and one negative, allowing for an offset of spring pressure that perfectly mates stiffness with a plush, responsive ride quality. The shape of the spring curve can also be adjusted to increase sensitivity without bottoming out. - TTX (Twin Tube) damping enables separated oil flow, so the fork will always provide the perfect degree of pressure. This way, it stays smooth and high in the travel without compromising bump absorption, traction, or stability. - A tapered alloy steerer and high alloy two-piece crown ensure high stiffness and tire control with less chassis flex and chassis hysteresis. 36mm stanchions with 46mm offset for party time on the trail. - 150 and 170mm travel options available. - 15x110mm spacing.
RockShox Pike RCT3 Solo Air (27.5-inch)
$1,029.99
RockShox's Pike RCT3 Solo Air is the ultimate fork for all-mountain and enduro riding. Burly 35mm stanchions, magnesium lowers, and a lightweight hollow forged aluminum crown deliver supreme stiffness to rip down the toughest enduro courses. When the bumps come hard and fast, RockShox's Charger damper keeps the fork high in the travel to maintain proper bike geometry, all while soaking up everything from flowy dirt ribbons to crazy rock-strewn goat paths. The RCT3 three-position switch changes between full travel, lockout and threshold modes so you can save your legs on a transition stage and open it up to pin the next timed downhill.
ENVE Mountain Fork
$625.00
Want to make your 29er rigid? You can't go wrong with ENVE's Mountain Fork. This full-carbon beauty is the height of aesthetic functionality. Gorgeous, yet rugged; simple, yet technologically advanced. Adjustable rake allows you to put your fork on multiple bikes, and the removable integrated fender is a brilliant touch. The dropouts are compatible with any 15mm thru-axle, so wheel changes are no issue.
DVO Jade Coil Shock
$585.00
- Compression loader damper unit with bladder for amazing small bump compliance and no stiction off the top - Externally adjustable rebound and high/low speed compression - Shock body cooling fins keep things running cool - Spring and mounting hardware not included, must be purchased separately - Adjustments: high speed compression, low speed compression, rebound, spring preload - 425 grams
3T Luteus Team
$549.99
3T's Luteus Team is an all-carbon cyclocross fork designed for use with disc brakes. It features include a tapered steerer and aluminum-faced fork ends for precise handling and simple wheel changes. It supports brake calipers for use with standard 160mm brake rotors. The left fork blade is reinforced at the brake mounting pillars to compensate for the stresses imparted by disc braking. On its outer face, there is a recessed channel with two integrated fixing points for tidy brake cable/hose management. Plus, the fork ends face forwards and have aluminum inserts to better resist the lateral stresses transmitted through the hub by rough terrain.
ENVE Cross Disc Fork
$542.00
Cyclocross and disc brakes go together like peanut butter and jelly. The mud and tight corners of an epic 'cross course demand the all-weather performance and modulation only discs can give you. Begin your upgrade to slop-busting, podium-topping stopping power with ENVE's Cyclocross Disc Fork. Crafted from 100% carbon, this pro-level fork is feathery light and ultra stiff so you can scale the steepest run-ups and bomb the nastiest rutted descents with ease.
ENVE Cross Fork
$527.00
When it comes to dismantling a 'cross course, ENVE's Cyclocross Fork has no equal. Its full-carbon construction is ultra light and super stiff with gobs of lateral rigidity for enhanced steering precision and braking performance. When you're holding a slippery, off-camber line and aiming for the podium, you'll be glad you have this carbon wonder bolted to the front of your rig.
ENVE Road Disc Fork
$527.00
Disc brakes aren't just for mountain and cyclocross bikes. Enjoy the all-weather performance and modulation only discs can give you with ENVE's Road Disc Fork. Crafted from 100% carbon, this pro-level fork is feathery light and ultra stiff so you can have the ultimate confidence when flying down your favorite descent.
Whisky Parts Co. No.9 Carbon Disc Cyclocross Fork w/Fender Mounts
$520.00
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Carbon Disc Cyclocross Fork. It eliminates uncomfortable chatter and vibration for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, disc brake mounts, and a stiff, secure thru-axle ensure low weight and precise braking and handling. Plus, fender mount means you'll be bounding out the door on even the rainiest days. It all results in an enhanced riding experience and adds up to performance that you can count on. - Axle to Crown Length: 395mm - Brake Mount: Post Mount 140mm - Crown Race: 40 - Front Axle: 15 x 100mm - Material: Carbon - Maximum Tire Clearance: 45mm - Offset: 45mm - Rotor Size: 185mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length: 300mm - Steerer Type: Tapered - Wheel Size: 700c
Whisky Parts Co. No.9 Carbon Mountain Fork 29-inch
$520.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch
Whisky Parts Co. No.9 CX Flat Mount
$520.00
Whisky's No.9 CX Flat Mount is the updated version of the original No.9 CX fork. Building on the precise tracking and braking performance of their original, they've pushed performance even further with this fork. Lighter weight, updated fitment and clean lines make for a supremely capable fork. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x42c/650x47c clearance - Hidden, Removable Fender Mounts
Whisky Parts Co. No.9 Fat Fork Carbon Mountain
$520.00
Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Fat Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough terrain, so you experience an astoundingly plush ride with precise handling. They've accomplished this by using a delightfully stiff and compliant UD carbon fiber construction, a tapered steerer, and a 15 x 150mm thru-axle. It all results in an enhanced riding experience and adds up to performance that you can count on. - Post style brake mount - DT RWS Axle included - UD full carbon construction - Axle to Crown Length: 480mm - Brake Mount: Post Mount 160mm - Crown Race: 40 - Front Axle: 15 x 150mm - Material: Carbon - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: 1-1/8 – 1-1/2-inch tapered - Weight: 750 grams - Wheel Size: 26-inch
Whisky Parts Co. No.9 RD+ Flat Mount
$520.00
Whisky's No.9 RD+ is an all-road fork designed for versatility with abundant tire clearance, up to 700x38c or 650x47c. Hidden and removable fender mounts make this fork all season capable. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x38c/650x47c clearance
Whisky Parts Co. No.9 Road Flat Mount Disc Fork
$520.00
The Whisky No.9 RD thru-axle fork is designed from the ground up to offer a modern road fork experience. Big tire clearance, flat mount brake capability, and internal cable routing all add up to a clean look and capable performance. Featuring sleek hidden fender mounts, this fork carries through with Whisky’s promise of refined, versatile performance. - 1-1/4-inch Tapered steerer tube - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 700 x 30c max recommended tire size - Includes thru axle and Whisky Parts Co. compression plug
ENVE 1.0 Road Fork
$489.00
So light it defies superlatives, ENVE's 1.0 Road Fork is a premium upgrade for your steed. ENVE's proprietary molding process creates a 100% carbon fork, from the dropouts to the steerer with absolutely no cutting, drilling or bonding involved. This gives you the ultimate in low weight, cornering precision and road feel so you can dance up steep climbs and rocket down technical descents at the front of the pack.
Whisky Parts Co. No. 7 Road Plus Fork
$420.00
The No.7 road fork features full unidirectional carbon construction, available in tapered or straight steerer tubes. - Full unidirectional carbon construction - Mid-Reach Caliper rim brake compatible - 35c max recommended tire size - ASTM Condition 2 - For off-road riding and jumps less than 12" - No rider weight limit - 5 year Whisky warranty - Accommodates road plus tires - Fender mounts
Whisky Parts Co. No.7 Carbon Cantilever Cyclocross Fork
$420.00
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.7 Carbon Cantilever Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using the proven technology of a delightfully stiff and compliant UD carbon fiber construction. It all results in an enhanced riding experience and adds up to performance that you can count on. - Cantilever brakes with 22mm posts - 51mm clearance between fork blades - Includes compression plug - Axle to Crown Length: 392.2 mm - Brake Mount (Fork): Canti Studs - Crown Race: 30 - Front Axle: 10mm x 100mm - Material: Carbon - Maximum Tire Clearance (Fork): 48mm - Offset: 45 mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300 mm - Steerer Type: Straight - Wheel Size: 700c
Whisky Parts Co. No.7 Carbon Disc Cyclocross Fork
$420.00
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.7 Carbon Disc Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using proven technologies like a delightfully stiff and compliant UD carbon fiber construction, not to mention the use of disc brake mounts on their CX forks. It all results in an enhanced riding experience and adds up to performance that you can count on. - Axle to Crown Length: 392.2mm - Brake Mount (Fork): Post Mount 140mm - Front Axle: 10mm x 100mm - Material: Carbon - Maximum Tire Clearance (Fork): 48 - Offset: 47mm - Rotor Size (Fork): 160mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300mm - Wheel Size: 700c
Specialized Chisel Carbon Fatboy Rigid Fork
$400.00
Lighten the mood with Specialized's Chisel Carbon Fatboy Rigid Fork. The uni-directional full carbon monocoque structure with carbon legs, crown, and steerer is featherweight. It's got a 160mm post mount for brakes, an integrated aluminum crown race, and aluminum dropouts that are compatible with 111mm hub and SBC OS28 end-caps for increased stiffness.
Whisky Parts Co. No.7 Road (12mm Thru-Axle)
$399.00
The Whisky No.7 RD thru-axle fork is a thoroughly modern road fork for road bikes with tapered steerer tubes. It features a 12mm thru-axle for precise handling, clearance for high-volume road tires, and clean internal cable routing. Flat mount brake capability offers clean caliper fitment and backwards compatality with post mount brakes using adaptors.
ENVE 2.0 Road Fork
$387.00
For corner-hugging precision, feathery low weight and unmatched vibration damping, pick up ENVE's 2.0 Road Fork. ENVE's proprietary molding process creates a 100% carbon fork, from the dropouts to the steerer with absolutely no cutting, drilling or bonding involved. This lets ENVE trim excess grams from the 2.0 while also boosting its stiffness for a pro-level ride.
Specialized Chisel Carbon 29er Rigid Fork
$350.00
A rigid carbon fork is good for two things: dumping weight and chiseling your skills to perfection. Specialized's suspension-corrected Chisel Carbon 29er Rigid Fork keeps your geometry dialed, offers slick brake cable routing, and delivers excellent stiffness. The uni-directional carbon monocoque structure with carbon legs, carbon crown, and carbon steerer is featherweight. It's got a 160mm post mount for brakes, an integrated aluminum crown race, and aluminum dropouts that are compatible with standard quick release axles as well as Specialized's OS28 end-caps for increased hub/fork stiffness.
Whisky Parts Co. No.7 Road (Quick Release)
$325.00
The Whisky No.7 RD fork is a modern caliper road fork for road bikes with tapered steertubes. Their No.7 RD fork features a standard 9mm x 100mm QR axle. It offers low weight, precise handling, and clearance for 28c tires. This is a perfect upgrade fork for in lieu of a steel or alloy fork, and makes a great replacement fork for existing carbon product.
All-City Electric Queen Fork
$250.00
Here it is, you asked for it, you got it! We’ve created a segmented mountain bike fork to pair with our Electric Queen. Even better, we’re offering it in painted-to-match colors for those of you who bought a Cyan splatter complete or one of the yellow/pink/black fade Queens. Now you can make your EQ over into the fully rigid bicycle of your dreams. - 4111 butted and tapered fork blades - Clearance for 27.5 x 3.0 or 29 x 2.25 tires - 15x110mm Boost spacing - E.D. coated for durability and rust prevention - 1-1/8" Straight steerer tube - Thru-Axle included - Axle to Crown Length: 485 mm - Brake Mount (Fork): IS Disc Brake 160 - Crown Race: 30 - Material: Steel - Offset: 51 mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Straight - Steerer Tube Length (mm): 350 mm
Page 1 of 3 Next page